Ashanti Glass Bead Making
in Daabaa, Ghana

Mr. Asumado learned  how to make recycled glass beads from his uncle. He now runs a family-owned studio in Daabaa, Ghana. For more information, please call him at 243575557 or email him at beadsin.dusbeads@Gmail.com
 

Glass windows and bottles are ground into fine powder in this mortar. 

Stacks of fired clay molds wait to be filled with glass powder. They may be reused many times, even when broken.  Cassava stems, used to form the holes in the beads, are harvested from plants that grow outside the studio.

Terracotta clay is modeled into a disk, cut to size, then stamped with a shaped wooden tool (the spike secures the cassava stem). The mold will be fired to 1112oF / 800o C to 1472oF / 1000o C to prepare it for bead making.

A dry cassava stem is placed in the central depression, then cut. For single colored beads, the glass powder is poured all over the mold, the mold is bumped on the side to settle the powder, then it is tilted so that the excess may be wiped off with a feather. The cassava stem will burn out during firing and form the hole.

 The kiln was constructed from local red clay. It was covered with a liquid clay mixture to fill in the cracks right before firing. The filled molds were put in the kiln, the kiln was heated for 10 minutes, more fuel was added, the molds were fired for 20 to 35 minutes at 600o to 800o C until the glass powder melted, then the molds were removed from the kiln to cool.

Horizontally striped beads are made by layering several colors of glass, one over the other. The dried cassava stem is laid into the mold to form the hole, then the powdered colors are added layer by layer. . .

. . . by layer.

The fired beads are turned over in the mold, then reheated to form the other side. After cooling, the rough edges are ground off by rubbing them by hand on a wet abrasive stone.

To create barrel-shaped beads, two fired halves are joined with a piece of dry cassava stalk, placed back in the mold, then re-fired (to join them together). Smooth beads are strung, then washed on a wet stone.

Monica Asumado inserted a piece of dry cassava stem into a fired bead to support it while she painted it with ceramic colorant (that was mixed with water), then she put it back into the mold with the stem so that it could be re-fired. The stem fires out and the colorant melts and adheres to the beads.

Links:
Bead Making in Odumasi Krobo, Ghana

Adinkra in Ntonso, Ghana
Ashanti Kente Weaving in Bonwire, Ghana
Ashanti Kente Weaving in Adawomase, Ghana
Ewe Kente Cloth Weaving in Denu, Ghana 
Lost Wax Casting in Krofofrom, Ghana 
Painting and Baskets of Sirigu, Ghana    
Ga Coffins in Teshie, Ghana 
Glassmaking in Guatemala 
Carol Ventura's Home Page 

Hit Counter

Web page, photographs, and text by Carol Ventura.