Vince Pitelka
Appalachian Center for Craft
Tennessee Technological University

Up Handouts/Info 2010 2510 3510 3511 3520a 3520b 3521a 3521b 3530

Vince Pitelka - wpitelka@tntech.edu
Office Hrs. Tues., Thurs 1:30 to 2:30 - Office Phone 931/372-3051 ext. 111
or 615/597-6801 ext. 111, Home - 615/597-5376

Art 3521b -  Intermediate-Advanced Clay Studio - Syllabus
Kilns and Firing Theory

Students With Disabilities requiring accommodations should contact the Office of Disability Services (ODS). An Accommodation Request (AR) should be completed as soon as possible, preferably by the end of the first week of the course. The ODS is located in the Roaden University Center, Room 112; phone 372-6119.

Required Texts
Pitelka, Vince. Clay: A Studio Handbook. American Ceramic Society, 2001
Olson, Fred, The Kiln Book, or Lou, Nils, The Art of Firing

Course Objectives - to build studio self-confidence and independence based on:

bullet 1) A strong sense of personal artistic style and direction.
bullet 2) An advanced working knowledge of ceramic form and decoration.
bullet 3) A sound working knowledge of clay/glaze chemistry and kilns/firing theory.
bullet 4) A familiarity with professional studio practice.
bullet 5) An awareness of historical and contemporary ceramics, and the inherent ethnic and cultural diversity in ceramic form and decoration.

Course Description
This course involves a complex dynamic, combining students ranging from early intermediate levels to the most advanced. In order for this to work, expectations and requirements must be flexible, and it is up to all of us to make sure that we each make the most of this opportunity. Our goals are to increase your command of the ceramic medium, to help you develop individual content and aesthetic in your work based on your own personal involvement with clay, and to get you to a point where you are autonomous, self-sufficient, and self-motivated in the studio. Primary emphasis is hands-on studio work, while secondary emphasis this semester is an exploration of kilns and firing theory, involving a series of lecture/discussions, assignments and midterm and final exams.

In order to assure effective learning among such a diverse group of students, each of you will submit a project proposal as explained below, outlining your own project sequence and completion dates. Depending on your level in clay, I will provide as much specific direction as you need in following your own project sequence. At the same time, it will help greatly to have some common basis for comparison and critique, and with that in mind there will be several vessel assignments through the semester which may be wheel-thrown or handbuilt, with emphasis on both utility and innovative form. We will have slide-shows and demos for each of those assignments, and a group critique when each is done. Otherwise, specific studio discussions or demos dealing with form and technique may be scheduled at any time to meet your particular needs. On a regular basis we will have informal group reviews to compare notes on what everyone is doing.

The Secondary Emphasis - Kilns and Firing Theory
While our primary focus is hands-on studio work, as a secondary emphasis we will study kilns and firing theory, encompassing the full range of firing processes available here at the Craft Center. Through the semester we will work with all of our kilns, and you will each be expected to have work in those firings and to be involved in the firing process. Each kiln has it own particular qualities and idiosyncrasies, and if you get comfortable with the design and operation of all the kilns we have here you will be very well prepared to fire almost any kiln anywhere.

Inventorying Your Knowledge and Skills
As you proceed through the 352A-B series, it is important to periodically inventory the skills and techniques you have explored, and purposefully address your weaknesses. As much as possible I will try to recognize your needs and provide information and assistance in a timely fashion, but because of the broad range of skill levels in one class this presents a special challenge, and I rely on you to deal with this issue and to ask for help whenever you need it. It is imperative that you achieve broad-based familiarity with ceramic materials and techniques. It is too easy for an emerging artist to settle into a narrow stylistic direction based upon proficiency in a limited range of materials and techniques, without experiencing all the alternatives. Invariably the resulting work betrays a shallowness of method and material, and lacking familiarity with other directions in clay the artist often experiences studio burn-out.

There is an inventory list attached, and I expect you to put it to good use. Don’t be intimidated by it. You do not need to be an expert in all of these areas, but you should be acquainted with all of them. The pursuit of knowledge is habit forming, and if you already know a little about something it makes it much easier to find out more later on. Also, you will be far more sure of your own stylistic direction if it arises from broad fluency in ceramic materials, processes, and forms. It is what you don't know that holds you back.

The Project Proposal
In the first week of class we will discuss possible directions each of you intend to follow with your own work, and by the second week you will submit a typewritten project proposal which you and I will mutually agree upon. This need not be a lengthy proposal, but do not take it lightly. It is essential that you start the semester with a clear plan of where you intend to go with your work.

Your project can be multi-faceted. If you are an intermediate-level student you will want to identify a direction based on personal interest and commitment, but your proposal should also include work in areas where you need development. If you are an advanced student, your proposal will focus on the primary direction in your studio work, but do not neglect the skills inventory. For all students, as the semester proceeds your direction may evolve significantly, and in that event you will need to submit a modified project proposal at mid-semester.

How Much Work Should You Do In This Class?
The amount of work you do is up to you, but there is no substitute for practice. You have to go through a lot of work to become an autonomous, confident studio artist. From quantity production comes fluency in the media and the willingness to take risks, and from risk-taking comes the most productive learning. If your primary work is large scale, then you also need to do smaller work in quantity so that you are always trying new ideas and techniques.

As professional clay artists starting out in the real world you will work very hard to make a good living. If you have made the right choice and are genuinely dedicated, the studio involvement and commitment will come easy, and the studio life will bring you a great deal of satisfaction. But consider this: if the willingness to work hard in the studio comes as a struggle here at the Craft Center, then it is unrealistic to expect that it will materialize when you are out of school. Your future success as a clay artist hinges upon your level of dedication and accomplishment here.

Studio Time
We will spend a considerable amount of in-class time on lecture/discussions and group reviews. Expect to put in at least six hours per week outside of class to make satisfactory progress on your work. Establish a regular work schedule and stick to it.

The Question of Scale
Scale is an important issue, because it requires skill to work large. At the same time, the way the work speaks to us depends on many factors, and in some cases large scale can diminish the effectiveness of the work. Carefully consider this issue, and make sure that the scale of your work is appropriate for what you are trying to say. We have a broad range of kilns, but none that are really huge except for the hoggama. This need not limit you, because your work can be made in sections to be assembled when fired.

Content and Narrative
Content and narrative are central whether your intent is figurative sculpture or functional pots. Unless your work "speaks" to the user/viewer with authority and originality it will be seen as ordinary. We tend to talk about content much more with work which is obviously narrative, but you must always remember that intent and content are of central importance no matter what kind of work you are doing in clay. Even the simplest pot speaks volumes, and if utility is a primary concern, then you must consider the degree to which your work visually invites use.

As you are searching for an honest personal direction in your work, don’t be afraid to take chances. Make work which is connected to personal commitments and concerns. Experiment with expressive surface effects and see what happens! The greatest disappointment in life is to miss a good opportunity. Make the most of this one.

Choice of Materials in Your Work
You can use anything at all. In contemporary ceramics, mixed media combinations are a critical issue. Some non-ceramic materials will survive the firing and can be incorporated into the damp clay work (consider shrinkage). A wide variety of other materials (almost anything!) can be incorporated into the work after the firing. Use materials which are appropriate to your intent and content.

Access to Information Outside of Class
If you are unsure of something or need information feel free to seek me out at any time in or out of class. If I'm not here, call me at home. Our artists-in-residence serve as back-up faculty, and are available to provide you with information and to help out with your work.

Keep your text, studio handbook, and sketchbook around at all times so you can consult them when the need arises. And make use of the library! We have a wonderful little library containing a great collection of books and all the major contemporary fine craft magazines. I expect you to spend time in the library regularly keeping track of what is going on in the clay world, and I expect you to bring that information into our discussions. If you talk about your work and the work of others within the context of historical and contemporary clay, I will notice.

The Sketchbook
Purchase a good quality artist’s sketchbook (not lined paper), and use it to develop your ideas and to provide a place for technical notes, kiln sketches, glaze recipes, etc. Adapt the sketchbook to your individual needs. I will not collect them for grading, but I will expect to see them during reviews.

Contacting You Via Email
I will occasionally send you messages via the TTU email distribution list for this class.  This has become a preferred means of getting class information to students, and it is your responsibility to check your email daily.  If you use another email address, then set your TTU email address to forward to your preferred address.  You will be responsible for any information sent to you via the TTU email distribution list for this class

Determining Your Grade
Up to 65% of your grade depends on your studio work (and your sketchbook) in a project series mutually agreed upon by you and me, plus participation in assigned studio projects. Creativity, productivity, and originality will be generously rewarded. 20% depends on involvement in the kilns/firing component of this class, including assigned projects, participation in firings (loading, firing, unloading, and cleanup), and the midterm and final exams. At least 15% depends on class participation, including active involvement in group reviews and a proactive participation in the day-to-day routines of the studio, including general cleanup.

Individual and Group Reviews
Once at midterms and again at finals we will schedule individual and group reviews to evaluate and document your progress. Periodically we will have informal group reviews to compare notes about what everyone is doing. Resident artists and/or students/faculty from other areas may be invited to join in on group reviews.

Required and Recommended Tools and Supplies
By now you own a good range of ceramic tools, and you should add to your collection every semester. We have lots of tools in the gallery, and more are available at Mid-South Ceramics in Nashville, plus I have lots of catalogs. To save money, consult the section on "Ceramic Tools You Can Find or Make" in the studio handbook. The following represents a basic list of essential studio tools and supplies.

bulletTextbook - Clay: A Studio Handbook
bulletSketchbook (not lined paper!!) for sketches and notes
bulletSelection of band-loop and/or steel-strap trimming tools - wire-loop tools are intended only for sculpting wet clay
bulletSelection of sponges, including ones which can be cut or carved for glaze/slip stamps
bulletCut-off wires - if you are throwing off the hump, make a Japanese-style cut-off string
bulletWooden knife and assortment of wooden modeling tools
bulletNeedle tools
bulletMetal, wood, and rubber ribs
bulletPieces of chamois - car wash chamois from Walmart or auto parts store is great, but make sure it is real chamois
bulletX-Acto knife (pencil handle with 1" tapered blade) and fettling knife
bulletForks and toothed ribs for scoring clay
bulletCalipers
bulletRolling-pin
bullet24" ruler
bulletCompass for drawing circles
bulletPlastic or metal draftsman's square
bulletWood paddles
bulletLarge selection of bisque stamps and other textured/patterned tools and/or materials
bulletSurform file and plane - designed to be woodworking tool - blade like cheese-grater - available from hardware or home improvement store - file has short curved blade, plane has longer flat blade
bulletSelection of brushes for slips and glazes - the bamboo handle long-bristled brushes are best, including the wide "hakeme" brushes
bullet30-gallon plastic barrel for clay
bulletSelection of plastic buckets and other containers, including 5-gallon buckets with lids for recycling clay
bulletPainter's canvas (get 10 oz. or 12 oz. canvas) for covering work surface and to cut into sheets for rolling out slabs - best prices are at big fabric stores, or as painter's dropcloth canvas at house paint stores
bulletA few old towels, tee-shirts, or other soft absorbent rags
bulletGood collection of plastic sheeting for covering work - dry cleaner bags are excellent
bulletIf you are doing large sculptural work, get a few old sheets or other large pieces of soft thin fabric to wick away condensation when damp forms are covered with plastic  
bulletGood quality respirator - not disposable paper ones!

Course Schedule
This schedule includes pertinent dates and events, but not class assignments. Review dates are approximate.

bullet First Week - Monday classes meet on Thursday.  Introduction to class, review of syllabus, discussion of ideas for individual project proposals, set up studio areas, mix clay.
bullet Second Week - No Class on M. L. King Birthday - Discuss and turn in project proposals.
bullet Third Week - Discussion - introduction to kilns and firing practice.
bullet Fourth Week - Discussion - electric and gas kilns and firing practice
bullet Fifth Week - Discussion - firing theory, part one. Group review.
bullet Sixth Week - Discussion - firing theory, part two.
bullet Seventh Week - Discussion - gas kiln design and construction, part one.
bullet Eighth Week - Discussion - gas kiln design and construction, part two. Discussion of proposals for individual gas kiln designs.
bullet Ninth Week - Mid-semester Reviews
bullet Tenth Week - Spring Break
bullet Eleventh Week - Slide discussion - kiln history, part one.
bullet Twelfth Week - Slide discussion - kiln history, part two. Discussion/review of kiln designs in progress.
bullet Thirteenth Week - Discussion - Other kiln types and firing processes.
bullet Fourteenth Week - Discussion - kiln repair. Group review.
bullet Fifteenth Week - Work on projects, kiln designs.
bullet Sixteenth Week - Kiln designs due - discussion/review of kiln designs
bullet Seventeenth Week - Take-home exam on kilns and firing processes due. Individual Reviews and Group Final Review with Potluck Refreshments. All individual reviews and studio cleanup must be completed by the last day of classes.

²

Appalachian Center for Craft Homepage   -  Tennessee Tech Homepage
Site maintained by: Vince Pitelka -  Last Updated: November 15, 2009